Products
We supply high-quality readymix concrete designed to meet the demands of modern construction projects. Our concrete is produced in a controlled batching plant environment to ensure consistent strength, durability, and performance.
Our Products
A high-density concrete that has a unit weight ranging from about 3,000 to 3,750 kg/m3, almost 50% higher than that of conventional concrete. In some cases, iron may be used as the aggregate. Heavy Weight Concrete is used in the construction of radiation shields.
Heavy Weight Concrete
_ed.png)
A special type of concrete with a high porosity that allows water from precipitation and other sources to pass through it. Typically, pervious concrete contains little or no fine aggregate and has just enough cementitious paste to coat the coarse aggregate particles
Pervious Concrete (No Fines Concrete)
A highly flowable concrete that can spread into place under its own weight and achieve good consolidation in the absence of vibration without exhibiting defects such as segregation and bleeding. SCC is used in all structural elements, but mainly in highly congested steel elements and where vibrators are difficult to access.
Self-Compacting Concrete (SCC)
Integral coloring pigments can be used in concrete. This coloring admixture when mixed with concrete will give a rich, long lasting, fade resistant color that would eliminate the need for painting.
Colored Concrete
A concrete with in-place density approximately 1,000 to 1,750 kg/m3 compared to normal weight concrete that is made with a lightweight coarse aggregate. LWC reduces the dead load of concrete structures, allowing structural designers to reduce the size of columns, footings and other load bearing elements.
Light Weight Concrete (LWC)
.png)
CLSM is a self-compacting, flowable, cementitious material used primarily as a backfill or structural fill instead of compacted soil. CLSM requires no mechanical compaction, offers uniform support, and can be designed for easy excavation if needed. It is commonly used for trench backfilling, pipe bedding, and void filling.
CLSM (Controlled Low Strength Material)
.png)
​Environmentally friendly concrete that reduces CO₂ emissions typically by 20-40% by partially replacing cement with materials like fly ash or slag, while maintaining performance and improving durability.
Green Concrete
.png)
It is concrete that is reinforced by adding fine fibers uniformly distributed within the concrete mix, such as steel fibers or polypropylene fibers. These fibers improve the properties of concrete after hardening by increasing its resistance to cracking and shrinkage, enhancing its impact and tensile strength, and improving its overall durability.
Fiber-reinforced concrete is used in applications that require high performance, such as industrial floors, pavements, concrete elements subjected to dynamic loads, and tunnels
Fibrous Concrete